Frame and
Suspension Rebuild
Page 2
|
|
While we were were sending stuff to have sandblasted we decided to send the drive shaft too. |
|
The upper and lower control arms were also cleaned up and sandblasted. |
 |
 |
The rear axle was cleaned up and all of the built up grease and gunk was removed. The axle was also sandblasted even though I don't have a picture of it. We taped up axles to keep as much sand out from inside the housing as possible. |
| This is a great picture of what you can expect from using POR-15. This was brushed on and end up with almost a mirror finish after it is dried. This picture is of the axle after it has dried. |  |
