Body and
Frame Teardown
Page 2
|
|
Once the body is off the frame you are going to want to have some thing to put it on where you can move it without alot of trouble. Ray has come up with a simple and inexpensive solution. The only materials needed are three 2x4's, four 4" castors, and four pieces of scrap plywood. Cut one 2x4 in half and make a box out of the four pieces, attach the plywood for stability, and attach the four castors. |
|
Slide the newly made cart under the body and lower the body onto it. You now have a car body that can be moved with one hand. |
 |
 |
A shot of what you have once this major step is done. Now you can either turn your attention to the frame or continue to work on the body. |
